Setting Up Telemetry Toggle GPS Triggers

DISCLAIMER

The feature is applicable to MOTOTRBO radios only. WAVE user devices do not support the trigger.

Prerequisites

• Create a group of radios which telemetry data change must trigger their GPS location update.
• Enable GPS Service

Procedure

1. In the Configurator, go to the Settings tab.

2. On the tab, in its left pane, expand Radio Network Services, and then click GPS.
   Centralized GPS settings appear in the right pane.

   9.7+9.15.109+

   

   

3. In the right pane, in the table, perform the following actions:

   1. Identify the required group.
   2. For the identified entry, in the On GPIO Pin Status Change column, select the check box.

4. Repeat the previous step for other entries, using different distances.

5. In the bottom part of the Configurator, click Save  to save changes.

Postrequisites

To apply changes and restart the server, click Restart in the bottom part of the Configurator.

See Also

• MOTOTRBO Telemetry