Setting Up Advanced Privacy Keys in LCP

Prerequisites

• Using CPS/RMCC, obtain IDs and values of symmetric keys.
• If required, log on to the Configurator as a System Admin.

Procedure

1. In the Configurator, on the Systems tab, expand NAI Systems → <system name> → Wireline Interface, and then click Security Settings.
   List of secure keys appears in the right pane.

   

2. In the right pane, in the AES area, perform the following actions:

   1. Click Add.
   2. In the new row of the table, in the Key ID column, double click the current ID, and then enter the proper key ID.
   3. In the same row, in the Key Value column, double click the field, and then type the required key.

   4. Ensure the key value is valid, and then proceed to next steps.

      Warning

      Once you change the focus from the Key Value parameter, the value of the key hides and will be unavailable for review.

3. Repeat the previous step to add more keys.

4. In the bottom part of the Configurator, click Save  to save changes.
5. To apply changes, click Restart in the bottom part of the Configurator.

Postrequisites

• Set up secure key for voice transmissions