Skip to content

Setting Up Phone Call Routing Enhancements in LCP

SMARTPTT PLUS ONLY§

The procedure is applicable only to SmartPTT PLUS.

Prerequisites§

Process§

  1. In the Configurator, on the Systems tab, expand NAI Systems → Wireline Interface, and then click Sites.
    Routing table appears.

  2. If required, in the Site Priority Configuration table, limit a number of phone calls per site:

    1. In the row that relates to the required RF site, in the Max Number... column, enter a number of phone calls.

      Tip

      Choose between 1 and 12 (maximum number of trunk channels per LCP site).

    2. Repeat the previous step for other RF sites.

  3. If required, in the same table, set up phone call routing priority:

    1. Click the row that relates to the required RF site.
    2. To increase RF site priority by means of phone call routing, click Up  next to the table.
    3. To decrease RF site priority by means of phone call routing, click Down  next to the table.
  4. In the bottom part of the Configurator, click Save  to save changes.
  5. To apply changes, click Restart in the bottom part of the Configurator.

See Also§