Setting Up Transmit Timeout Timer in LCP

SMARTPTT PLUS ONLY

The procedure is applicable only to SmartPTT PLUS.

Prerequisites

• From LCP radio configurations, learn the duration of the timer (might be referred to as TOT).
• Connect to the LCP main repeater.

Procedure

1. In the Configurator, on the Systems tab, expand NAI Systems → <name of the LCP system>, and then click Wireline Interface.
   Basic connection settings appear.

   EnterprisePLUS

   

   

2. In the TX Time-Out Timer, s field, enter the TOT duration (in seconds).

3. In the bottom part of the Configurator, click Save  to save changes.
4. To apply changes, click Restart in the bottom part of the Configurator.

See Also

• Linked Capacity Plus Configuration
• Linked Capacity Plus Support