Individual Call Initiation Handling

From Custom Consoles

1. On the Custom Console, press the tile associated with the required subscriber.

2. Depending on the next indication, act as follows:

   • If indication changes to Link Establishment (1), then keep pressing the button until the voice channel is free.

     1. 

   • If indication changes to Wait (1), then wait until subscriber accepts/declines your call.

     1. 

   • If indication changes to Transmit (TX) (1), then speak into your microphone.

     1. 

   • If indication changes to Idle (1), then release the tile/button due to the call failure.

     1. 

From Radio Fleet

1. On the panel, press PTT next to the required radio subscriber.

2. Depending on the next indication, act as follows:

   • If indication changes to Link Establishment (1), then keep pressing the button until the voice channel is free.

     1. 

   • If indication changes to Wait (1), then wait until subscriber accepts/declines your call.

     1. 

   • If indication changes to Transmit (TX) (1), then speak into your microphone.

     1. 

   • If indication changes to Idle (1), then release the tile/button due to the call failure.

     1. " end="" end="" end="" end="" end="" end="

From the Calls Panel

1. On the Calls panel, press PTT in the entry where the required subscriber appears on the right.

2. Depending on the next indication, act as follows:

   • If indication changes to Link Establishment (1), then keep pressing the button until the voice channel is free.

     1. 

   • If indication changes to Wait (1), then wait until subscriber accepts/declines your call.

     1. 

   • If indication changes to Transmit (TX) (1), then speak into your microphone.

     1. 

   • If indication changes to Idle (1), then release the tile/button due to the call failure.

     1. " end="" end="" end="" end="" end="" end="

From the Radios Panel

1. On the Radios panel, press the tile associated with the required subscriber.

2. Depending on the next indication, act as follows:

   • If indication changes to Link Establishment (1), then keep pressing the button until the voice channel is free.

     1. 

   • If indication changes to Wait (1), then wait until subscriber accepts/declines your call.

     1. 

   • If indication changes to Transmit (TX) (1), then speak into your microphone.

     1. 

   • If indication changes to Idle (1), then release the tile/button due to the call failure.

     1. " end="" end="" end="" end="" end="" end="

From Call Windows

1. In the subscriber call window, press PTT.

2. Depending on the next indication, act as follows:

   • If indication changes to Link Establishment (1), then keep pressing the button until the voice channel is free.

     1. 

   • If indication changes to Wait (1), then wait until subscriber accepts/declines your call.

     1. 

   • If indication changes to Transmit (TX) (1), then speak into your microphone.

     1. 

   • If indication changes to Idle (1), then release the tile/button due to the call failure.

     1. " end="" end="" end="" end="" end="" end="

Using PTT Hotkeys

1. In the user interface, select the required subscriber.

2. Apply the related hotkey.

3. Depending on the next indication, act as follows:

   • If indication changes to Link Establishment (1), then keep pressing the button until the voice channel is free.

     1. 

   • If indication changes to Wait (1), then wait until subscriber accepts/declines your call.

     1. 

   • If indication changes to Transmit (TX) (1), then speak into your microphone.

     1. 

   • If indication changes to Idle (1), then release the tile/button due to the call failure.

     1. " end="" end="" end="" end="" end="" end="

Using Subscriber-Specific Hotkeys

1. Apply the required key combination.

2. Depending on the next indication, act as follows:

   • If indication changes to Link Establishment (1), then keep pressing the button until the voice channel is free.

     1. 

   • If indication changes to Wait (1), then wait until subscriber accepts/declines your call.

     1. 

   • If indication changes to Transmit (TX) (1), then speak into your microphone.

     1. 

   • If indication changes to Idle (1), then release the tile/button due to the call failure.

     1. " end="" end="" end="" end="" end="" end="

See Also

• Individual Calls