Skip to content

Capacity Max

SmartPTT supports wireline interface to MOTOTRBO Capacity Max a multisite trunked radio system from Motorola Solutions. The system is DMR Tier III compliant, the most scalable and perspective MOTOTRBO system.

Features§

Table below provides overview of basic functionality1 supported in SmartPTT Enterprise and SmartPTT PLUS at wireline interface to Capacity Max.

Value-added functionality2 of SmartPTT Enterprise and SmartPTT PLUS applies to available basic functions without any limitations.

Features Enterprise PLUS
Voice calls
Emergency
Radio commands
Voice Interoperability
GPS Location
Indoor Location
Text Messages
Job Tickets
Telemetry
Air Traffic Monitoring
System Health Monitoring

Voice calls§

  • Group calls
  • Wide area calls (a.k.a. system-wide all calls)
  • Local area calls (a.k.a. site and multisite all calls)
  • Private calls in OACSU mode.
  • Private FOACSU calls decode.
  • Broadcast group calls.

Emergency§

  • Emergency alarms decode
  • Emergency calls decode

Radio commands§

  • Call Alert
  • Radio Check/Silent Interrogate Encode
  • Radio Stun/Radio Disable Encode
  • Radio Revive/Radio Enable Encode
  • Radio Kill Encode
  • Ambience Listening/Remote Monitor Encode
  • Allow/Deny Lists

Interoperability§

  • Group calls patching
  • Phone Interconnect, including Enhanced Phone Interconnect
  • Analog and/or other MOTOTRBO interconnect
  • Inter-Server group call patching
  • Voice calls bridging
  • WAVE PTX interoperability
  • SmartPTT Mobile Interoperability

Presence etc.§

  • Presence Updates
  • Sing In and Sign Out

GPS Location§

  • GPS Triggers Encode
  • GPS Data Decode
  • GPS Batching
  • USBD Polling

Indoor Location§

  • Timeout Trigger Setup
  • Indoor Data Decode

Text Messages§

  • Group text messaging
  • Private text messaging

Telemetry§

  • Telemetry data decode
  • Telemetry data encode

Air Traffic Monitoring§

  • Voice calls information decode
  • Data calls information decode

Infrastructure§

  • Presence Service Backup
  • Multiple VRC Gateways
  • VRC Gateway Backup
  • MNIS Data Gateways Backup

Changelog§

9.14§

  • Increase range of supported RF Site IDs to 750 (total ID range is 1 to 900; includes non-RF sites).
  • Update the talkgroup setup view.

9.13§

  • USBD Polling is supported.
  • Advanced Telephony (call establishment on the control channel) supported.

9.12§

  • Seamless locate enhancements are supported.

9.11§

  • Interface for Air Traffic Interface Applications (ATIA) is supported to receive voice and data call information.

9.10§

  • Add the support of Capacity Max integrated with WAVE PTX.
  • Add the support of seamless voice and locate functionality.

9.8.1§

  • Support MNIS TCP interface to connect remote MNIS data gateways.
  • Change the status of the MNIS Data Gateway Relay from "actively supported" to "deprecated".

9.7.1§

Add the support of the single-slot data revert configuration.

9.5§

  • Add the dynamic group number assignment (DGNA) support.
  • Entities called “channels” associated with Capacity Max are removed from the Channels panel.

9.3§

  • Add the support of voice transmit priority.
  • Add the ability to permanently increase priority of user voice transmissions.
  • Add the ability for users to turn on and off the increased voice transmission priority.

9.1§

  • Add backup MNIS VRC gateway support.
  • Add backup MNIS data gateway support.
  • Increase range of RF Site IDs to 250 (total ID range is 1 to 255).
  • Increase number of supported VRC gateways to 14.
  • Increase number of supported backup Presence Services to 4.
  • Suspend the support of Capacity Max R2.6.

9.0§

  • Support first release of MOTOTRBO Capacity Max.
  • Support presence, voice, and data for Capacity Max.

Features below indirectly affect SmartPTT capabilities on the wireline interface to Capacity Max.

  • USBD Polling
  • MNIS TCP Interface
  • In-Band GPS
  • Alternate MNIS Data Gateways Interface
  • Alternate Presence Service Interfaces
  • USBD Polling
  • Enhanced Seamless Locate
  • Enhanced Phone Interface
  • Seamless Voice and Locate
  • WAVE PTX Support
  • MNIS TCP Interface
  • In-Band GPS
  • Multiple MNIS VRC Gateway Interfaces
  • Alternate MNIS VRC Gateway Interfaces
  • Alternate MNIS Data Gateways Interface
  • Alternate Presence Service Interfaces

See Also§

  1. Basic functionality is the semantic recognition (encode and decode) of data received/sent over the interface, their provision to/from SmartPTT users (including necessary visualization), and logging. Examples are voice calls decode/encode, subscriber GPS location, etc. ↩

  2. Value-added functionality is the one that is built on top of the basic functionality data. ↩