Linked Capacity Plus

SmartPTT supports Linked Capacity Plus, a multisite trunked DMR system from Motorola Solutions.

SmartPTT EnterpriseSmartPTT PLUS

Ambiguity

• The system might be referred to as Capacity Plus Mutlisite.
• Sometimes, the system might be referred to as Capacity Plus. However, Capacity Plus might also be a reference to a single-site Capacity Plus.

Features

Presented in the table below.

Table Conventions

• Double check box () means “fully supported”.
• Single check box () means “supported with limitations”.
• Cross () means “not supported”.

Features	Enterprise	PLUS
Group calls	1
Individual calls	2
Encrypted calls
Voice recording
Emergency
Radio commands
Presence (ARS)
Patching and Bridging
Phone Interconnect
GPS Location
Indoor Location
Text Messages
Job Tickets
Telemetry
RF Coverage
Air Traffic Monitoring
System Health Monitoring

For information about features supported with limitations, see prerequisites.

Benefits

End user benefits:

• Reduced expenses due to purchasing all-in-one product with options, not several software products.
• Ease of configuration and customization for individual user needs.

Distributor/reseller benefits:

• Reduced expenses due to offering all-in-one product, with all the necessary functions, support, and continuous improvements.
• Increased profitability due to different interfaces compliant with high-budget and low-budget projects.
• Compliance with various categories of products like voice dispatch, situational awareness, control room solutions etc.

Architecture

Available in the dedicated article.

Setup and Usage

Prerequisites:

• LCP Prerequisites

Setup:

• LCP Setup.

Changelog

9.15.100

• SMARTPTT ENTERPRISE ONLY:
  Introduced hybrid voice interface for two-way voice communications.

9.10

• SMARTPTT PLUS ONLY:
  Introducing LCP and WAVE PTX integrated solution.

9.8

• Introducing In-Band GPS functionality for LCP subscribers.

9.7

• Suspending two-way wireless voice interface.
  • SmartPTT Enterprise is now available for data-only solutions.
  • SmartPTT PLUS support both voice and data wireline interface.

9.3

• Introducing Sign In and Sign Out for LCP subscribers.

Earlier

• SMARTPTT PLUS ONLY:
  • Introducing NAI interface for voice and data in Linked Capacity Plus.
  • Introducing advanced encryption support for radio traffic.
  • Introducing phone call routing priority table.
• SMARTPTT ENTERPRISE ONLY:
  • Introducing data-only NAI interface for Linked Capacity Plus.
  • Introducing two-way wireless interface for voice and radio commands (one donor radio per talkgroup).

See Also

• MOTOTRBO™ Linked Capacity Plus
• Configuration Guide for Capacity Plus Multisite (Linked)
  PDF • 1,799 KB

---

1. Group call limitations occur due to hybrid voice interface. For details and recommendations, see “TX radios for group calls” in the Hybrid Voice Interface Prerequisites. ↩

2. Individual call limitations occur due to hybrid voice interface. For details and recommendations, see “TX radios for individual calls” in the Hybrid Voice Interface Prerequisites. ↩